Welcome to our website! Call us: +86-18622194621 E-mail: toptac@foxmail.com
| Quantity: | |
|---|---|
| | |
3240
fancyco
3920999001
Specification
| Name | Epoxy Fiberglass Sheet(3240) |
| Grade | A grade |
| Size | 1.02*2.02m,1.22*2.44m |
| Color | Yellow, Light Green |
| Thinkness | 0.3-100mm |
| Density | 2.2-2.25g/cm³ |
| Heat Resistance | 170ºC |
| Tensile Stenghth | ≥340MPA |
| Sample | Free of charge, Customer pay the freight |
Applications:
1.Used in mechanical, electrical and electronic insulation structure parts.
2.Used in Chemical machine parts.
3.Motor control, communication equipments
4.Separator between the magnetic ring inductors and the base of the bottom
5.Thermal power devices
6.Also suitable for high voltage transformer and switch cabinet, high temperature, high-power welder even in wet environment
7.Used in high-performance electrical insulation requirements.
8.FPC Stiffener, PCB drilling plate
9.precision planetary gears (grinding chips), precision test plates,
10.electrical equipment insulation stays partitions,
11.insulation pads, transformer insulation boards,
12.electrical insulation parts, grinding gears,
13.electronic switch insulation boards.
(1)Transformer oil, insulating parts in ICT, ITE, jig plate.
(2)PCB punching; reinforcement plate of testing fixture;
(3)Needle plate, carrier board and insulated electric and electronic products;
(4) Electrical insulation parts, electronic equipment, and suitable for the environment which has high mechanical strength, and moisture-resistance.
14. Spacer for choke and inductor coil
The epoxy glass fiber sheet serves as an insulation spacer for the upper choke.
The common mode inductance is divided into high voltage AC mode and output DC mode. The voltage between the two copper wires determines whether to use the spacer. If the lead string is added and the casing voltage is not high enough, the spacer shall not be added. But considering the consistency, it is more appropriate to have an insulation spacer in bulk production.
15. Baseboard for Transformer Bobbin
The functions of transformer's bobbin are as follows:
(1)To provide enough space for twining copper wires
(2)To fix the magnetic core of the transformer
(3)To support wires twining of the transformer by its wire channels
(4)To serve as a conductive component after it is soldered with tin and connected to PCB sheet
(5)To decide the direction of the transformer by its chamfer
16. Used as washers
(1) Sealing
(2) Increasing friction
(3) Reducing pressure
(4) Bearing high temperature
17. Baseboard for Printed Circuit Board(PCB)
Fiberglass epoxy prepreg is the basic material for the multi-layer PCB. It consists of reinforcing insulation material----glass fiber impregnated with thermoset resin. So it is suitable for the multilayer printed circuit board. Its flammability is UL94V-0 grade and after press processing, the final product could meet IPC-4101/21 standard.
18. Electric and electronic field
High Heating-resistance and Coorision Resisitance has given it application in many other areas such as transit and weapon industry. It is widely be in PDP, LCD, power baseboard, TV, refrigerator, washing machine, etc.
19. Other Applications
(1)Used in mechanical, electrical and electronic high insulation structure parts.
(2)Used in high-performance electrical insulation requirements as well as chemical machine parts.
(3)General machines parts and gear, generators, Pads, base, baffle as electric insulation component.
(4)Generator, transformer, fixture, inverter, motor.
Packing:
in carton or pallet, rolls
Specification
| Name | Epoxy Fiberglass Sheet(3240) |
| Grade | A grade |
| Size | 1.02*2.02m,1.22*2.44m |
| Color | Yellow, Light Green |
| Thinkness | 0.3-100mm |
| Density | 2.2-2.25g/cm³ |
| Heat Resistance | 170ºC |
| Tensile Stenghth | ≥340MPA |
| Sample | Free of charge, Customer pay the freight |
Applications:
1.Used in mechanical, electrical and electronic insulation structure parts.
2.Used in Chemical machine parts.
3.Motor control, communication equipments
4.Separator between the magnetic ring inductors and the base of the bottom
5.Thermal power devices
6.Also suitable for high voltage transformer and switch cabinet, high temperature, high-power welder even in wet environment
7.Used in high-performance electrical insulation requirements.
8.FPC Stiffener, PCB drilling plate
9.precision planetary gears (grinding chips), precision test plates,
10.electrical equipment insulation stays partitions,
11.insulation pads, transformer insulation boards,
12.electrical insulation parts, grinding gears,
13.electronic switch insulation boards.
(1)Transformer oil, insulating parts in ICT, ITE, jig plate.
(2)PCB punching; reinforcement plate of testing fixture;
(3)Needle plate, carrier board and insulated electric and electronic products;
(4) Electrical insulation parts, electronic equipment, and suitable for the environment which has high mechanical strength, and moisture-resistance.
14. Spacer for choke and inductor coil
The epoxy glass fiber sheet serves as an insulation spacer for the upper choke.
The common mode inductance is divided into high voltage AC mode and output DC mode. The voltage between the two copper wires determines whether to use the spacer. If the lead string is added and the casing voltage is not high enough, the spacer shall not be added. But considering the consistency, it is more appropriate to have an insulation spacer in bulk production.
15. Baseboard for Transformer Bobbin
The functions of transformer's bobbin are as follows:
(1)To provide enough space for twining copper wires
(2)To fix the magnetic core of the transformer
(3)To support wires twining of the transformer by its wire channels
(4)To serve as a conductive component after it is soldered with tin and connected to PCB sheet
(5)To decide the direction of the transformer by its chamfer
16. Used as washers
(1) Sealing
(2) Increasing friction
(3) Reducing pressure
(4) Bearing high temperature
17. Baseboard for Printed Circuit Board(PCB)
Fiberglass epoxy prepreg is the basic material for the multi-layer PCB. It consists of reinforcing insulation material----glass fiber impregnated with thermoset resin. So it is suitable for the multilayer printed circuit board. Its flammability is UL94V-0 grade and after press processing, the final product could meet IPC-4101/21 standard.
18. Electric and electronic field
High Heating-resistance and Coorision Resisitance has given it application in many other areas such as transit and weapon industry. It is widely be in PDP, LCD, power baseboard, TV, refrigerator, washing machine, etc.
19. Other Applications
(1)Used in mechanical, electrical and electronic high insulation structure parts.
(2)Used in high-performance electrical insulation requirements as well as chemical machine parts.
(3)General machines parts and gear, generators, Pads, base, baffle as electric insulation component.
(4)Generator, transformer, fixture, inverter, motor.
Packing:
in carton or pallet, rolls
